Olympus WS-760M - Page 64

64
5
EN
Menu setting method
Menu setting method
Notes
• Never format the recorder from a PC.
• Once the recorder is formatted, the music
 les with DRM may not be transferred to
the recorder again.
• When the recorder is formatted, all the
saved data, including locked  les and
read-only  les, are erased.
• After formatting, recorded voice  le
names may start from [0001].
• When returning the settings for the
functions to their initial settings, use
[Reset Settings] (☞ P.47, P. 57).
7 Press the OK `/ MENU button.
• Formatting begins and [Format !]
flashes on the display.
• [Format Done] appears when
formatting ends.
For WS-760M, WS-750M only:
• When an microSD card is inserted in the
recorder, be sure to con rm the recording
media as either [Built-in Memory]
or [microSD Card] so that there is no
mistake (☞ P. 47, P.57).
• It may take over 10 seconds to complete
processing. Never perform operations
such as the following while processing, as
they may damage the data. In addition,
replace the battery with a new one in
order to ensure that the battery will not
run out while processing.
1 Disconnecting the AC Adapter while
processing.
2 Removing the battery while
processing.
3 Remove the microSD card during
processing when [microSD Card] is
being used as the recording media.
• Formatting on the recorder will be
Quick Format. If you format the microSD
card, information of  le management
is refreshed and the data inside the
microSD card is not deleted completely.
When handing over and disposing the
microSD card, be careful about the
data leakage from the microSD card.
We recommend the microSD card to be
destroyed when you dispose the microSD
card (☞ P.19).
For WS-650S only:
• It may take over 10 seconds to complete
processing. Never perform operations
such as the following while processing, as
they may damage the data. In addition,
replace the battery with a new one in
order to ensure that the battery will not
run out while processing.
1 Disconnecting the AC Adapter while
processing.
2 Removing the battery while
processing.