14
Installation
SHELVES
These accessories must be used to place products inside the cooler. They are designed to optimize cooler’s
internal space.
Depending on your cooler’s model, it may have dierent types of shelves. These are some types:
FLOOR SHELVES
Observe that these shelves have supports to place them over cooler’s oor, as well as enough rods to support
product load.
LEVEL SHELVES
Shelves must have an adequate orientation and position, never to be forced or exert pressure on the cooler
walls or any other accessory.
All shelves must be rmly supported on all four corners with provided accessories:
To Next Page
Loading...
Need help?
General
