20
Operation
LIGHTING
Consider that this cooler has been designed with the intention to exhibit products to encourage your and your
supplier’s sales. For best results, lighting must be turned on during sale hours.
Our LED lighting technology allows an improved electric eciency, reducing and providing more operation
years with regard to lighting. LED lighting is located around the door perimeter, on the internal cabinet upper
portion, or around the perimeter of the internal cabinet.
Your cooler may include a switch that allows you to turn o lighting manually. Use it only when your business
is closed. During sale schedule, this lighting technology represents a minimum percentage of the cooler’s total
energy consumption.
If the cooler includes a Intelligent Control Function (CIF), lighting will be tuned o automatically in savings
mode. You don’t have to worry about this, each control will turn lighting o according to cooler characteristics
and the products contained in it. Just open the door to exit savings mode.
IMPORTANT: if you notice any lighting malfunction, please contact the Customer Service Center.
HINGED DOOR
Cooler’s door is designed to thermally isolate the refrigerated product from the environment. If it gets fractured
or broken, do not attempt to repair it; call the Customer Service Center.
With a moistened cloth, clean glass solid and glass door internal and external surfaces at least once per week.
At least every three months, clean the door’s seal, check it for perfect condition, and check whether it makes
contact with frame inside cabinet.
Door hinges and supports have been designed for an adequate turning radius and a proper seal separation
distance. If for any reason you need to replace or adjust, request support from the Omcan Tech Support
Department at 1-800-465-0234.
To Next Page
Loading...
Need help?
General
