15
Installation
Make sure the shelf and the product allow the door to close completely.
IMPORTANT: shelves must have an adequate orientation and position, never to be forced or exert
pressure on cooler walls or any other accessory.
VISISLIDE (OPTIONAL)
The Visislide system allows placing shelves and product in an angle; thus, bottles will always
slide to the front.
BASKETS (OPTIONAL)
Cooler may also have plastic or metal baskets to exhibit product.
ELECTRICAL CONNECTION
WARNING: ELECTRIC SHOCK RISK
• Connect to a three-pin outlet.
• Do not remove outlet ground pin.
• Do not use power adapters.
• Do not use extension cords.
• If failure occurs when following these instructions, it may cause re or electric shock.
To Next Page
Loading...
Need help?
General
