Need help?Do you have a question about the Omega Engineering OS136 SERIES and is the answer not in the manual?
General| Operating Temperature | 0 to 50°C (32 to 122°F) |
|---|---|
| Mounting | Panel mount |
| Sensor Input | Thermocouple, RTD |
| Output 1 | Relay or Solid State Relay (SSR) driver |
| Output 2 | Relay or Solid State Relay (SSR) driver |
| Control Mode | PID, On/Off |
| Display | 4-digit LED |
| Supply Voltage | 100 to 240 VAC, 50/60 Hz |
Details safety precautions, hazardous symbols, and compliance with IEC1010 standards.
Details the OS136 series, its temperature ranges, output options, emissivity, and physical design.
Guide for verifying contents, checking for damage, and reporting issues to the carrier.
Explains how the shielded cable connects power and output signals, with a wiring diagram.
Steps to ensure correct temperature measurement, including target size, alignment, and emissivity.
Discusses operating limits and warm-up/stabilization times due to ambient temperature changes.
Explains how contaminants affect readings and the use of accessories like the air purge collar.
Critical safety precautions for using the laser sighting accessory to prevent injury.
Step-by-step guide on attaching, using, and removing the laser sight for target alignment.
Lists temperature ranges, accuracy, repeatability, field of view, response time, outputs, and load requirements.
Provides technical details for the laser sight accessory, including wavelength, distance, power, and classification.
Instructions for initiating warranty or repair requests, including required information.
To Next Page
