Specifications
5
8
SECTION 5 – SPECIFICATIONS
5.1 - General
Temperature Range:
OS136-1 -18 to 204ºC (0 to 400ºF)
OS136-2 149 to 538ºC (300 to 1000ºF)
Accuracy: @22ºC (72ºF) ambient
OS136-1 3% of Rdg or 4.4ºC (8ºF) whichever is greater
OS136-2 3% of Rdg or 5.5ºC (10ºF) whichever is greater
From 185 to 510ºC (365 to 950ºF)
Repeatability: 1% of Rdg.
Optical Field of View: 6 to 1 (Distance to Spot Size)
Spectral Response: 5 to 14 microns
Response Time: 150 msec, 0 to 63% of final value
Emissivity: Fixed at 0.95
Analog output:
MA 4 to 20 mA
V1 0 to 5 Vdc
V2 0 to 10 Vdc
K K type Thermocouple, compensated
MVC 10 mV/ºC
MVF 10 mV/ºF
Output Load Requirements:
Min. Load (0 to 5 Vdc) 1 K-Ohms
Min. Load (0 to 10 Vdc) 2 K-Ohms
Max. Load (4 to 20 mA) (Power Supply – 4) / 20 mA
Min. Load (10 mV/Deg) 10 K-Ohms
Min. Load (K T/C) 100 K-Ohms
Operating Ambient Temperature:
No Water Cooling 0 to 70ºC (32 to 158ºF)
With Water Cooling (OS136-WC) 0 to 200ºC (32 to 392ºF)
With Air Cooling (OS136-WC) 0 to 110°C (32 to 230°F)
Operating Relative Humidity: Less than 95% RH, non-condensing
Water Flow Rate for OS136-WC: 0.25 GPM, room temperature, minimum
Air Flow Rate for OS136-WC 5 CFM (2.4 liters/sec)
Warm up Period: 1 to 2 minutes
Thermal Shock: About 30 minutes for 25ºC abrupt
ambient temperature change
Air Flow Rate for Air Purge Collar 1 CFM (0.5 liters/sec.)
Transmitter Housing: Stainless Steel 316, NEMA-4 & IP65 rated
Power: 12 to 24 VDC @ 50 mA
Dimensions: 19 OD x 89 L mm (0.75" OD x 3.5" L)
Weight: 0.40 lb (181 g)
To Next Page
Loading...
Need help?
General
