Omega 24 User Manual

If the unit is turning on for the first time after a new battery is installed, it will
automatically default to the METER mode (ie. temperature measurement
operation). It also defaults to K-type thermocouples, and °F readings with
0.1° resolution. The corresponding LCD annunciators are enabled:
12
Figure 3. Display Test
Figure 2. Keypad

Omega 24 Specifications

General

Display Type	LCD
Accuracy	±0.5°C
Resolution	0.1°C
Probe Type	Stainless steel
Measurement Range	-50 to 300°C (-58 to 572°F)