Need help?Do you have a question about the Omega RDXL4SD and is the answer not in the manual?
General| Input Channels | 4 |
|---|---|
| Input Type | Thermocouple, RTD, Thermistor, Voltage, Current |
| RTD Types | Pt100, Pt1000 |
| Connectivity | USB |
| Operating Temperature | 0 to 50°C (32 to 122°F) |
| Display | Backlit LCD |
| Thermocouple Types | J, K, T, E, R, S, B, N, C |
| Thermistor Types | 10 kohm |
| Voltage Input Range | ±100 mV, ±10 V |
| Current Input Range | 0 to 20 mA |
| Temperature Range | -200 to 1820°C |
| Resolution | 0.1° |
| Data Logging | Yes |
| Data Format | CSV |
| Power | 4 AA batteries or AC adapter |
| Operating Conditions | 0 to 85% RH, non-condensing |
Step-by-step guide for measuring temperature using Type K thermocouples.
Procedure for measuring temperature with Type J, T, E, R, or S thermocouples.
Guide for measuring temperature using Pt 100 ohm probes.
How to display the temperature difference between two channels.
Steps for preparing the meter before starting data logging, including SD card.
Procedure for setting up and using the auto datalogger function with timed sampling.
Guide for manual data logging with zero sampling time and position setting.
How to view the current time and sampling time settings.
Explanation of how data is organized on the SD card.
To Next Page
