6. Saving data from the SD card
to the computer (EXCEL software)
1)After executing the Data Logger function, remove the
SD card from the “SD card socket” (3-18, Fig. 1).
2)Plug in the SD card into the Computer's SD card slot
or insert the SD card into the “SD card adapter”, then
connect the “SD card adapter” into the computer.
3)Power ON the computer and run the " EXCEL software ".
Down load the saving data file ( for example the file
name : TMA01001.XLS, TMA01002.XLS ) from the SD
card to the computer. The saved data will be displayed onto
the EXCEL software screen (for example as the below
EXCEL data screen). The user can use EXCEL
data to make further Data or Graphic analysis.
EXCEL data screen ( for example )
14
To Next Page
Loading...
