Omega RDXL4SD - SD Card Data Structure

5-5 Check sampling time information
During the normal measurement mode (not execute the
Datalogger), If you press “Sampling Button” (3-8, Fig. 1)
once, the lower LCD display will present the Sampling
time information in seconds.
5-6 SD Card Data structure
1)When using for the first time, the SD card
will generate a folder:
TMA01
2)When using for the first time, to execute the Datalogger,
under the route TMA01\, will generate a new
file name TMA01001.XLS.
After this the Datalogger will save the data
to the file TMA01001.XLS until the data column
reaches 30,000 columns, then it will generate
a new file. For example TMA01002.XLS
3)Under the folder TMA01\, if the total files are greater
than 99 files, it will generate a new route, such as
TMA02\ ........
4)The file's route structure :
TMA01\
TMA01001.XLS
TMA01002.XLS
.....................
TMA01099.XLS
TMA02\
TMA02001.XLS
TMA02002.XLS
.....................
TMA02099.XLS
TMAXX\
.....................
.....................
Remark : XX : Max. value is 10.
13