Omega RDXL4SD - Beeper Sound ON;OFF; Temperature Unit Selection

7-4 Set beeper sound ON/OFF
When the lower display shows “bEEP”
1)Use the “▲” Button " ( 3-5, Fig. 1 ) or “▼” Button " 
( 3-6, Fig. 1 ) to select the upper value to " yES " or
" no ".
yES - Meter's beep sound will be ON with default.
no - Meter's beep sound will be OFF with default.
2)After selecting the upper text to “yES” or “no”, press the
“Enter Button” (3-4, Fig. 1) will save the setting
function with default.
7-5 Select the Temp. unit to °C or °F 
When the lower display shows “t-CF”
1)Use the “▲” Button " ( 3-5, Fig. 1 ) or “▼” Button
(3-6, Fig. 1) to select the upper Display text to “C” or
“F”.
C - Temperature unit is °C
F - Temperature unit is °F
2)After Display unit is selected to “C” or “F”, press the
“Enter” Button (3-4, Fig. 1) will save the setting
function with default.
18