The crown has 3 positions:
1.
Normal position (wearing position): when the crown is positioned
against the case, the crown ensures that the watch is water-resistant.
2. Correcting the date: pull the crown out to position 2, turn the
crown forwards or backwards. Push the crown back to position 1.
3. Time setting: pull the crown out to position 3. The seconds hand
will stop. Turn the crown forwards or backwards. Synchronise the
seconds by pushing the crown back to position 1 to coincide with
a given time signal.
2 Operating instructions
Quartz watch
CALIBRES 1376, 1456, 4061 (fig. IV)
The crown has 2 positions:
1. Normal position (wearing position): when the crown is posi
-
tioned against the case, the crown ensures that the watch is water-
resistant.
2. Time setting: pull the crown out to position 2, turn the crown
forwards or backwards. Push the crown back to position 1.
CALIBRES 1532, 4561, 4564 (fig. I)
To Next Page
Loading...
Need help?
General