• Pusher B: reset (after a stop).
Note: resetting/zeroing of the sub dials must only be carried out after
the chronograph has stopped. Never push the chronograph’s two
pushers (A and B) simultaneously (calibre 3201).
Calibre 1866 – date and moon phase correction
– Correcting the date (small counter at 12 o’clock): press
corrector (C).
– Correcting the moon phase: press corrector (D) to move the disc
into the full-moon position. Then determine how many days have
elapsed since the last full moon (consult a calendar) and press the
corrector the equivalent number of times.
When the watch is running, the date and moon phase move forward
automatically.
Important: avoid pressing correctors (C) and (D) (date and moon
phase) if the watch is displaying any time between 7 and 12 o’clock
(am or pm).
Do not set the date by moving the hour hand past midnight, since
this may desynchronise the date and moon phase indicators.
ê
To Next Page
Loading...
Need help?
General