Omega BLADE Series User Manual

NOTICE: The manufacturer will accept no responsibility for any electrical damage resulting from
improper installation of this product, be that either damage to the vehicle itself or to the installed
device. This device must be installed by a certified technician. This guide has been written for
properly trained technicians; a certain level of skill & knowledge is therefore assumed. Please
review the Installation Guide carefully before beginning any work.
!
The brand names and logos found in this guide are property of their respective owners. Automotive Data Solutions Inc. © 2015
U.S. PATENT NO. 8,856,780
Automotive Data Solutions Inc.
INSTALL GUIDE
OL-BLADE-AL(DL)-GM4-EN
AvAiLABLE fOr : OL-BLADE-AL
GM4
Rev. Date: July 14, 2015
Doc. No.: ##22406##
20150714
Alarms & Remote Start

Omega BLADE Series Specifications

General

Operating Voltage	12V DC
Remote Battery Type	CR2032
Alarm System Integration	Yes
Remote Start	Yes
Keyless Entry	Yes
Security System Integration	Yes
Temperature Sensor	Yes
Turbo Timer	Yes
Operating Temperature	-40°C to 85°C
RF Frequency	433.92 MHz
Number of Buttons on Remote	5
Security Features	Anti-scan
Compatibility	Compatible with most vehicles
Smartphone Control	Optional (requires additional module)
Engine Immobilizer Bypass	Yes (with additional module)

Summary

Installation Guide Introduction

Product Overview and Safety Notice

Introduces the guide and provides crucial safety warnings and installation requirements.

Vehicle Compatibility

Install Type Selection and Features

Details installation types and features available for various vehicle models.

Module Programming

Cartridge Installation

Steps for installing the programming cartridge into the unit.

Module Programming Procedures

Detailed steps for programming the module for Type 1, 3, 4 and Type 2 configurations.

Vehicle and System Operations

Module Diagnostics and LED Status

Factory Reset Procedure