Omega RS-6 User Manual

OWNER'S MANUAL
&
INSTALLATION INSTRUCTIONS

RS-6
REMOTE CAR STARTER MODULE
FOR AUTOMATIC TRANSMISSION VEHICLES ONLY

Omega RS-6 Specifications

General

Operating Voltage	12V DC
Keyless Entry	Yes
Trunk Release	Yes
Engine Start	Yes
Engine Stop	Yes
Compatibility	Most vehicles
Remote Start Confirmation	Yes

Summary

Omega RS-6 Owner's Manual and Installation Instructions

Day-to-Day Operations: Activation and Safety

Details how to activate, deactivate, and safety features of the remote car starter.

Wiring Connections and Safety Features

Main Wiring Harness Connections

Guides through connecting the primary wires of the RS-6 module.

Black Wire: Ground Connection

Red Wire: Constant Power Connection

Blue Wire: Ignition #1 Output

Yellow Wire: Ignition #2/Accessory Output

Green Wire: Starter Output

8-Wire Connector and Safety Inputs

Details critical safety connections like brake and neutral safety inputs.

Yellow/Black Wire: Positive Brake Input

Disables remote start when the brake pedal is pressed; critical safety feature.

White/Blue Wire: Neutral Safety Input

Enables remote start only when the gear selector is in Park or Neutral.

White Wire: Parking Light Output

Orange Wire: Optional Anti-Grind Feature

Prevents starter engagement if the ignition key is turned while the engine is running remotely.

System Programming and Configuration

Switch #1: Engine Type Setting

Switch #2: Engine Run Time Setting

Switch #3: Automatic Starting Feature

Switch #4: System Enable Switch

Switch #5: Starter Output Timing