Need help?Do you have a question about the Omega REC-12 and is the answer not in the manual?
General| Brand | Omega |
|---|---|
| Model | REC-12 |
| Category | Remote Starter |
| Language | English |
Identifies transmitters, valet switch, and status light as core system components.
Details the actions performed when the LOCK button is pressed.
Explains the switch's role in mode changes and system overrides.
Describes the Status Light's role as a system indicator and deterrent.
Explains UNLOCK button actions, including door unlocking and starter interrupt.
Describes TRUNK button function for opening trunk and unlocking doors.
Explains activation of the 3rd channel via the "---" button.
Details PANIC mode activation and its effects on horn and lights.
Explains activation of the 4th channel via simultaneous button press.
Describes activation of the 5th channel via simultaneous button press.
Explains remote anti-carjack activation and its relation to programmable features.
Details how to activate Valet Mode and its visual/audible indicators.
Explains the procedure to exit Valet Mode.
Outlines the steps for performing a System Override.
Explains the meaning of the Status Light being off.
Describes the Status Light indicating Valet Mode.
Explains rapid flashing as an automatic function in progress.
Describes slow flashing indicating door lock and starter disable engagement.
Explains indicator flashes for transmitter verification.
Explains single light flash for door lock confirmation.
Details double flash and illumination for door unlock confirmation.
Explains single chirp for door lock confirmation.
Explains double chirp for door unlock confirmation.
Details chirp reminder for Valet Mode when ignition is off.
Describes the function and configuration of the optional Starter Disable.
Allows automatic door locking 90 seconds after ignition is turned off.
Enables automatic door relocking 90 seconds after remote unlock.
Controls door locking/unlocking based on ignition status.
Unlocks doors automatically when trunk release is activated.
Adjusts the pulse duration for door lock/unlock outputs.
Configures the domelight supervision or other channel outputs.
Configures flashing light output or other channel outputs.
Customizes system confirmation chirp volume and behavior.
Sets automatic starter disable engagement timing.
Configures ignition or remote activated anti-carjacking protection.
Controls parking lights staying on after remote unlock.
Configures the "..." button for 3rd channel or PANIC.
Step-by-step guide for accessing and changing programmable features.
Procedure to reset all programmable features to factory defaults.
Procedure for learning new transmitters into the system.
Information on how to purchase replacement transmitters.
Guides on mounting the control module, status light, and valet switch.
Details connections for the main 5-pin harness wires.
Details connections for the secondary 7-pin harness wires.
Explains the domelight supervision output connection.
Overview of door lock connection types and options.
Describes multiplex doorlock systems and their interface needs.
Wiring diagram for standard 3-wire negative doorlocks.
Wiring diagram for 3-wire negative doorlocks with optional DLS.
Wiring diagram for negative doorlocks with optional DLP-P3.
Wiring diagram for 3-wire positive doorlocks with optional DLS.
Wiring diagram for 5-wire reversal doorlocks with optional DLS.
Diagram detailing the relay wiring for driver's door priority unlock.
Summary of wire colors and their functions in the REC-12 system.
Identifies the various ports on the REC-12 control module.
A matrix summarizing all programmable features and their options for quick reference.
To Next Page
