is
in
Valet Mode, Le., it will still lock and unlock the doors, and the transmitter's
"TRUNK"
and"
•••
" Buttons will still operate - but the optional Starter Disable
will not operate, and any programmed automatic functions are suspended.
To
exit Valet Mode simply press and release the Valet Switch at any
time; the Status Light will change from being on solid steady Red to being off.
System Override: If the last system operation was locking the doors
by the
tran~mitter,
a System Override is required before then placing the
system into Valet Mode, or starting the engine if the optional Starter Disable is
installed.
To
obtain a System Override:
Step 1 Enter the vehicle normally.
Step 2 Using your
key,
turn the ignition "ON".
Step 3 Within 5 seconds, press and release the Valet Switch once. The Status
Light will turn off.
o
•
II
To Next Page
Loading...
