The Status Light
~-:7:~'
The REC-12 includes a Status Light to inform you
of
the system's op-
erational condition. If your system includes a Starter Disable circuit, it's condi-
tion is also reflected
in
this light's operation, along with any automatic features
which may have been programmed to operate.
Light Off - Ignition switch is "on"
OR
the system is "at rest", or standby, await-
ing a transmitter command, and is also indicating that no automatic functions
are occurring or will occur.
Light On Solid Red - The system is
in
"Valet Mode".
Light Flashing Rapidly - An automatic function, such as automatic locking or
automatic starter disable, is in progress.
Light Flashing Slowly - This slow flashing will occur whenever the transmitter
has been used to lock the doors, and also that the Starter Disable (if installed)
is engaged.
Light Flashes 1 to 4 Times after Ignition
"On"
- This is the number
of
oper-
ating transmitters stored
in
the system's memory. These indicators are part
of
the Automatic Transmitter Verification operation. This indicator will flash for 10
seconds after the vehicle's ignition is turned ON.
II
To Next Page
Loading...
Need help?
General
