Feature #7 Flashing light relay output
Default setting: Flashing lights (press LOCK)
Options: 5th Channel Single Pulse (press UNLOCK)
5th Channel Latch/Unlatch (press TRUNK)
Horn Honk Output (press
•••
)
This feature changes the operation
of
the flashing light output. It can be configured as a 5th chan-
nel output for additional accessories if needed and you can select from a pulsed or latching output.
It can also
be
configured as a horn honk output for vehicles requiring a high amperage and/or posi-
tive output. This should only be configured by the installer.
Feature #8
Confirmation chirps
Default setting: Low volume (press LOCK)
Options: High volume (press UNLOCK)
On demand (press TRUNK)
OFF (press
•••
)
This feature configures the way the system's confirmation chirps operate. They are defaulted on
with low volume chirps.
You
can change it to have high volume, operate· on demand, or stay perma-
nentlyoff.
On
demand requires 2 presses
of
LOCK or UNLOCK to hear the confirmation.
Feature #9
Default setting:
Options:
Automatic starter disable
OFF (press
•••
)
90 Seconds After Ignition OFF (press LOCK)
90 Seconds After Unlock By Transmitter (press UNLOCK)
con(inued->
II
To Next Page
Loading...
Need help?
General
