,
",I('
'"
Programmable
Features
(cont'd)
~.?:~¥l"
Feature
#4
Doors
unlock
when
trunk
release is activated
Default setting:
ON
(press LOCK)
Option:
OFF (press UNLOCK)
This feature will automatically unlock the doors whenever the trunk release is activated to offer
extra convenience. It can be turned off if the output is used for another function.
Feature #5 Door
lock/unlock
pulse
timing
Default setting: 0.8 Second (press LOCK)
Options:
3 Seconds (press UNLOCK)
Double 0.8 Sec.
Unlock
Pulse (press TRUNK)
This feature adjusts the pulse length
of
the door lock/unlock outputs. The required setting
is
deter-
mined by your vehicle and this should only be configured by the installer.
Feature #6
Domelight relay
output
Default setting: Domelight
supervision
(press LOCK)
Options:
4th Channel Single Pulse (press UNLOCK)
4th Channel Latch/Unlatch (press TRUNK)
2nd Parking
Light
Output
(press
•••
)
This feature changes the operation
of
the domelight supervision output. It can be configured as a
4th channel output for additional accessories if needed and you can select from a pulsed or latch-
ing output. It can also
be
configured as an additional light flash output for vehicles with split parking
light systems. This should only be configured by the installer.
II
To Next Page
Loading...
Need help?
General
