Omega CALIBRE 1666 - Date and Alarm Configuration

/12
OMEGA SA WORLD SERVICE ORGANIZATION GT-19-C-069-E - A - 1666
Specifi c Information for calibre 1666
Fig. 2.3
Fig. 2.4
2.3 DATE
To Change the Date :
- Press the crown until the DATE function is
displayed.
- Pull the crown to position 2 :
Go On ? is
displayed and the date, month and year blink.
- Press P1,
YEAR is displayed and the year blinks ;
Press P2 to add or P3 to subtract years.
- Press P1,
MONTH is displayed and the month blinks ;
Press P2 to add or P3 to subtract months.
- Press P1,
DAY is displayed and the date blinks ; Press
P2 to add or P3 to subtract from the date. The day of
the week displayed is adjusted automatically by the
perpetual calendar.
- Press P1, then press P2 or P3 for
D-M (date-month) or
M-D (monthdate).
- Push the crown back into position 1.
2.4 ALARM
The ALARM function rings every 24 hours for 20
seconds. When the alarm rings, the
ALARM function is
displayed. If the alarm ring is not stopped, a second
alarm rings one minute later for 15 seconds.
- Press on the crown until
ALARM is displayed.
- Press on the crown during 3 seconds or pull it into
position 2.
MIN is displayed and the minutes blink.
- Press P2 to add or P3 to subtract minutes.