ECD 15B / 40B / 90B / 150B - Installation and operating manual
8
Functions
LED indicator / TEST button
At power on there are few short green
flashes. These tell us ECD type.
1. One flash: ECD 15B
2. Two flashes: ECD 40B
3. Three flashes: ECD 90B
4. Four flashes: ECD 150B
Operating
LED indicates a condensate sensor output.
1. Green FLASHES: Sensor detects no
water
2. Green ON: Condensate is detected
Short flashes of red light indicate a
production mode. In this case, you should
contact producer.
By pressing TEST button valve opens.
To Next Page
Loading...