Remote Transmitter Operations
Pressing and releasing the
“arm/lock” button arms
the security system
and locks the doors.
Pressing and holding
this button for three
seconds will first arm,
and then activate the
Panic feature, locking
the doors.
and unlocks the doors unless
the system is activated. The
unlock operation may be
configured so that pressing
this button once disarms the
system and unlocks only the
driver's door, and pressing a
second time unlocks all of
the doors.
Transmitter part number: #143-03
Pressing the “channel 2”
button for two seconds can
be used to activate an output for
an optional function such as trunk
release.
Pressing and releasing this button
twice arms or disarms the system
without the confirmation chirps.
Page - 5
Pressing and releasing the “disarm/
unlock” button disarms the system
Pressing and holding this
button for three seconds will
first disarm, and then activate the
Panic feature, unlocking the doors.
Pressing the “panic” button for
three seconds will activate the Panic feature,
but without locking or unlocking the doors.
To Next Page
Loading...
