Mounting the Operator:
operator
back
plate
filler
fasten to jamb tubes
fasten along header
Notes:
-Ensure that door swings and latches easily before attempting to add operator
-Remove cover from operator
-Operator to wall mounting must be very strong!
-All loads from high winds & other overloads will be transferred thru the fasteners to the wall
-Use appropriate fasteners and anchors for the type of wall being mounted to
-Mounting to drywall construction requires plwood backer inside the wall to attach operator
-If the door framing is proud of the wall, place a filler allowing the operator to sit flat & plumb
-Attach to vertical jamb tubes when mounting to curtain wall
drywall mounting curtain wall mounting
plywood
back
er
board
drill & fasten
thru
slots
O M E G A A U T O M A T I C S 2 0 1 8
V 2 . 0
Fasteners
120 VAC
To Next Page
Loading...