3
Installation Instructions
The adjacent furniture must be able to withstand a minimum temperature rise of 50°C above the
ambient temperature of the room it is located in, during periods of use. The power supply to the
appliance must be cut off before any adjustments or maintenance work is done on it.
Preparation for Installation and Use
WARNING: This appliance must be installed by an authorised service person or qualified technician,
according to the instructions in this guide and in compliance with the current local regulations.
• Incorrect installation may cause harm and damage, for which the manufacturer accepts no
responsibility and the warranty will not be valid.
• Prior to installation, ensure that the local distribution conditions (electricity voltage and
frequency) and the adjustments
• of the appliance are compatible. The adjustment conditions for this appliance are stated on the
label.
• The laws, ordinances, directives and standards in force in the country of use are to be followed
(safety regulations, proper recycling in accordance with the regulations, etc.).
Instructions for the Installer
• After removing the packaging material from the appliance and its accessories, ensure that the
appliance is not damaged. If you suspect any damage, do not use it and contact an authorised
service person or qualified technician immediately.
• Make sure that there are no flammable or combustible materials in the close vicinity, such as
curtains, oil, cloth etc. which may catch fire.
• The worktop and furniture surrounding the appliance must be made of materials resistant to
temperatures above 50°C.
• The appliance should not be installed directly above a dishwasher, fridge, freezer, washing
machine or clothes dryer.
To Next Page
Loading...
