Product User Guide | 15
OM-CP-OCTPRO
LOGGING DATA
Automatic Stop
Selecting Automatic Stop will bring up the following configuration screen.
Reading Rate
When the user selects Reading Rate, the following configuration screen will appear. Once the desired reading rate is selected, the user
must select Apply to use that option, or Cancel to return to the previous screen. See page 27 for available reading rates.
Select Automatic Stop
Select Reading Rate
• Day: Use the up and down arrows to adjust the day.
• Hour: Use the up and down arrows to adjust the hour.
• Minute: Use the up and down arrows to adjust the
minute.
• am/pm: Use the up and down arrows to select am or
pm (12 -hour clock only).
• Apply: Applies the start or stop time settings and returns
the user back to the Logging Configuration screen.
• Cancel: Cancels the start or stop time settings and
returns the user to the Logging Configuration screen.
Select Start Logging
Select Start Logging
To Next Page
Loading...
