EasyManua.ls Logo

Omega OM-CP-OM-CP-OCTPRO - Specifications

Omega OM-CP-OM-CP-OCTPRO
31 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Product User Guide | 26
OM-CP-OCTPRO
Specifications subject to change. See Omegas terms and conditions at
www.omega.com.
BATTERY WARNING: Battery may explode or fire if mistreated. Do not
disassemble or dispose of in fire. Do not charge except specified with
charging condition. Do not heat above 212 °F, or short circuit. Do not
crush or modify.
SPECIFICATIONS
GENERAL
Dimensions 6.65 in x 4.40 in x 1.41 in
(168.9 mm x 111.8 mm x 35.8 mm)
Data logger only
Touch Screen
Dimensions
5 inches
Number of
Channels
8
Weight 1.3 lbs (20.8 oz)
IP Rating IP20
Start Modes Immediate Start & Delay Start
Memory 1,000,000 or 5,000,000 readings
Battery Type Rechargeable 3.7 V Lithium Ion Battery Pack
Battery Life Continuous on-screen sampling: 7–9 hours
depending on display setting and reading rate
Stand-by mode: 100 hours
Data Format Exported .csv file format, .mtb or both
Time Accuracy ±1 minute/month
Operating
Environment
0 °C to +50 °C (32 °F to +122 °F)
0 %RH to 95 %RH non-condensing
Enclosure
Material
Polycarbonate, TPE Protective Boot
Calibration Factory calibration is recommended annually
0 - 24 mA
Range -5 mA to 50 mA
Resolution 0.0001 mA
Accuracy ±0.024 mA (0 to 24 mA)
Input Impedance 30 Ω
0 - 100 mV
Range -100 mV to 2450 mV
Resolution 0.0001 mV
Accuracy ±0.1 mV (0 to 100 mV)
Input Impedance 1 GΩ
Maximum Voltage 3.0 V
0 - 10 V
Range -0.5 V to 12.0 V
Resolution 0.0001 V
Accuracy ± 0.01 V (-0.5 V to 12.0 V)
Input Impedance 1 GΩ
Maximum Voltage 25 V
FREQUENCY / PULSE
Maximum Count 4,000,000,000
Maximum Frequency 25 KHz
Input Signal 0 V to 12 V
Input Impedance 58 KΩ
TEMPERATURE PT-100 (2-WIRE RTD) (0.00385 CURVE)
Range -25 °C to +850 °C (Probe Dependent)
(18.5 Ω to 390.5 Ω)
Resolution 0.01 °C
Accuracy ±0.1 °C (-200 °C to +400 °C) (Probe Dependent)
±0.034 Ω (18.5 Ω to 247.1 Ω)
TEMPERATURE PT-100 (3-WIRE RTD) (0.00385 CURVE)
Range -25 °C to +850 °C (Probe Dependent)
(18.5 Ω to 390.5 Ω)
Resolution 0.01 °C
Accuracy ±0.1 °C (-200 °C to +400 °C) (Probe Dependent)
±0.034 Ω (18.5 Ω to 247.1 Ω)
TEMPERATURE PT-100 (4-WIRE RTD) (0.00385 CURVE)
Range -25 °C to +850 °C (Probe Dependent)
(18.5 Ω to 390.5 Ω)
Resolution 0.01 °C
Accuracy ±0.1 °C (-200 °C to +400 °C) (Probe Dependent)
±0.034 Ω (18.5 Ω to 247.1 Ω)
TEMPERATURE NTC-1 (2252)
Range -25 °C to +150 °C (Probe Dependent)
(29,380 Ω to 41.9 Ω)
Resolution 0.01 °C
Accuracy ±0.50% FSR (Probe Dependent)
TEMPERATURE NTC-2 (10K)
Range -25 °C to +150 °C (Probe Dependent)
(102,900 Ω to 238 Ω)
Resolution 0.01 °C
Accuracy ±0.50% FSR (Probe Dependent)
RTD Note (All RTD Configurations)
Temperature Specifications based on ideal 100 Ω PT RTD Complaint
with IEC 751(1983) and ITS-90. Accuracy based on 4-wire configuration.

Related product manuals