Product User Guide | 27
OM-CP-OCTPRO
SPECIFICATIONS
Reading Rate Information
All channels will use the same reading rate.
Reading rates will be capped at 4 Hz when a temperature channel is selected.
• 4 KHz (Supports single channel of voltage or current measurement only)
• 2 KHz (Supports single channel of voltage or current measurement only)
• 1 KHz (Supports single channel of voltage or current measurement only)
• 500 Hz (Supports single channel of voltage or current measurement only)
• 250 Hz (Supports single channel of voltage or current measurement only)
• 100 Hz (Supports single channel of voltage or current measurement only)
• 50 Hz (Supports single channel of voltage or current measurement only)
• 25 Hz (Supports single channel of voltage or current measurement only)
• 10 Hz (Supports multiple channels of voltage or current measurement only)
• 4 Hz
• 1 Second
• 2 Seconds
• 5 Seconds
• 10 Seconds
• 15 Seconds
• 30 Seconds
• 1 Minute
• 2 Minutes
• 5 Minutes
• 10 Minutes
• 15 Minutes
• 30 Minutes
• 1 Hour
• 2 Hours
• 5 Hours
• 10 Hours
• 12 Hours
• 24 Hours
THERMOCOUPLE
TYPE RANGE RESOLUTION ACCURACY
J -200 °C to +760 °C 0.1 °C ±0.5 °C
K -270 °C to +1370 °C 0.1 °C ±0.5 °C
T -270 °C to +400 °C 0.1 °C ±0.5 °C
E -270 °C to +980 °C 0.1 °C ±0.5 °C
R -50 °C to +1760 °C 0.5 °C ±2.0 °C
S -50 °C to +1760 °C 0.5 °C ±2.0 °C
N -270 °C to +1300 °C 0.1 °C ±0.5 °C
B 50 °C to 1820 °C 0.5 °C ±2.0 °C
Measurement Accuracy
• At room temperature (25 °C ±10 °C) after 60 minute
warm-up period.
• Temperature calibrated accuracy is thermocouple
dependent.
• Accuracy does not include Cold Junction
Compensation (CJC). CJC error: ±1.5 °C
To Next Page
Loading...
