Product User Guide | 14
OM-CP-OCTPRO
LOGGING DATA
Start Logging
When Start Logging is selected from the Home screen, the Logging Configuration screen will appear and the user will be prompted to
name the data logging session. If the user has not already configured the channels, they will be prompted to configure prior to starting
a logging session. The user will be able to configure start time, stop time, and reading rate in addition to naming the logging session.
Delayed Start
Selecting Delayed Start will bring up the following configuration screen.
Keyboard will appear when user
taps in the session text field.
Select Delayed Start
• Session Name: Enter the desired name for the logging
session. If no name is given, a unique default name will
be assigned (i.e. Session 1).
• Delayed Start: Select a Delayed Start time or tap the
Start Logging Data button to start immediately.
• Automatic Stop: The user has the option of selecting
an Automatic Stop time. If no time is selected, the user
will use the Stop Logging button on the Home screen to
manually stop the device.
• Reading Rate: The reading rate will default to 1 minute
or use the setting of the last session configuration.
Maximum number of readings per session is 1,000,000.
• Start Logging Data: Begins logging data immediately.
• Cancel: Cancels user changes and returns back to the
Home screen.
• Day: Using the up and down arrows, the user is able to
adjust the day.
• Hour: Using the up and down arrows, the user is able to
adjust the hour.
• Minute: Using the up and down arrows, the user is able
to adjust the minute.
• am/pm: Using the up and down arrows, the user is able
to select am or pm (12-hour clock only).
• Apply: Applies the start or stop time settings and returns
the user back to the Logging Configuration screen.
• Cancel: Returns the user to the Logging Configuration
screen.
Select Start Logging
Select Start Logging
To Next Page
Loading...
