Product User Guide | 3
OM-CP-OCTPRO
PRODUCT OVERVIEW
Device Orientation
The OM-CP-OCTPRO display can rotate 180 degrees depending on the desired orientation of the device. This option is available from
the Settings menu under the Display section. Please note: Power restart required in order to apply screen rotation.
Device Ports
The OM-CP-OCTPRO features 10 ports. Please refer to the
images above for the port number as it relates to device
orientation.
Channels and Functions
• Ports 1 thru 8 are sensor input channels
(Temperature, Current or Voltage)
• Port 9 serves as an alarm output
• Port 10 serves as a ground for the device
Frequency or Pulse Counter
Can only be used on port 1
3-Wire and 4-Wire PT100 RTD Sensors
Use ports 1-2, 3-4, 5-6, or 7-8
2-Wire PT100 RTD Sensors
Can be used on ports 1-8
Desktop Orientation
For handheld and tabletop use, the inputs will be on the top.
Note port number as it relates to device orientation.
Tabletop Orientation
The OM-CP-OCTPRO features a built in kickstand on the back of
the device for use on a flat surfaces.
Wall Mount Orientation
For wall mount use the unit will be rotated so that the inputs will
be on the bottom.
1
1
Port:
Port:
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
To Next Page
Loading...
