PART
6:
SERVICE AND TRANSPORT
6.1. REQUIREMENTS BEFORE CONTAINING TO SERVICE
If the oven does not operate:
The oven may be plugged off, there has been a black out. On models fitted with a timer, time
may not be regulated.
If the oven does not heat:
The heat may be not adjusted with oven’s heater control switch.
If the
interior lighting
lamp does not light
:
The electricity must be controlled. It must be controlled whether the lamps are defective. If
they are defective, you can change them as following the guide.
Cooking (if
lower-upper
part does not cook equally)
:
Control the shelf locations, cooking period and heat values according to the manual.
Except these, if you still have any problem with your
product,
please call to
the
“Authorised Service”.
6.2. INFORMATION RELATED TO TRANSPORT
If you need any
transport
:
Keep the original case of product and carry it with its original case when need to be carried.
Follow the transport signs on case. Tape the cooker on upper parts, hats and heads and
saucepan carriers to the cooking panels.
Place a paper between the upper cover and cooking panel, cover the upper cover, than tape
to the side surfaces of oven.
Tape cardboard or paper onto the front cover on interior glass of oven as it will be suitable
to the trays, for the wire grill and trays in your oven not damage to the oven’s cover during
transport. Also tape the oven’s covers to the side walls.
If does not have the
original
case
:
Take measure for external surfaces (glass and paints surfaces) of oven against possible
blows.
To Next Page
Loading...
