7
INSTALLATION OF BUILT IN OVEN
Insert the oven into cabinet partly by pushing it forward. Open the oven door and insert 2 screws into the holes
on the oven frame. While the product frame touches the wooden surface of the cabinet, tighten the screws.
The dimensions and material of the cabinet in which the oven will be installed must be correct and resistant to
increases in temperature. In a correct installation, contact with electrical or insulated parts must be prevented.
Insulating parts need to be fitted in a way to ensure that they cannot be removed by using any kind of tool.
Installing the appliance in the close vicinity of a refrigerator or a deep-freezer is not recommended as the
performance of the above-mentioned appliances will be negatively affected due to emanating heat. After removing
your oven from its packaging, be sure that the oven is not harmed. In the case you suspect any damage to the
appliance, do not use it; immediately contact an authorised Service Centre.
To Next Page
Loading...
