9
8
CONTROLS
OVEN FUNCTION/WARNING LIGHT CONTROL
The oven function control knob is used to select the different functions.
Each is explained in detail further in the manual. To select a function,
turn the control knob to the desired oven function and then set the
temperature with the thermostat control.
OVEN THERMOSTAT CONTROL
The oven thermostat control is used to select the desired temperature for
cooking. When the temperature inside your oven reaches the value set, the
thermostat will cut the circuit and the thermostat light will go off. When the
temperature falls below the set value, the thermostat will again be turned on
alongside the thermostat light. It is normal for this to occur during the
cooking process, particularly when the door has been opened.
NOTE: The temperature setting can be checked while the oven is operating by either pressing the “+” or “-“
buttons (without first pressing the mode button), or slightly adjusting the temperature control.
To Next Page
Loading...
