Ignition Switch
87a
30
87
85
86
Coil
Connect “Switch” side of cut wire
to terminal
#
30 of the relay.
Control
Module
Starter Motor
Orange Wire
Connect “Motor” side of cut wire
to terminal
#
87a of the relay.
Note: Connect 12-gauge
Green starter wire to the
motor side of the cut wire
20
22-Gauge Orange Wire: Anti-Grind Output
Connection If Desired. The function of the Orange wire is to provide a
250mA Negative auxiliary output which may be used to operate a starter motor
“Anti-Grind” relay, which prevents accidental starter grind should the key be turned
while the remote starter is in operation.
To Next Page
Loading...