10
USE General information
naviGatinG betWeen GroUpS and paGeS
The functions are separated into two groups (see illustration opposite).
Pressing once on the crown brings up the next function.
Pressing and holding brings up the second group of functions.
Certain functions are displayed over two pages. Pressing twice on the crown brings up page 2 if it is
available (see illustration opposite (1/2)).
The display returns to page 1 after 10 seconds, or by pressing once on the crown.
proGramminG mode
In programming mode, the hands move so as to clear the displays.
Programming exited automatically after 20 seconds without activity.
When a chime sounds, the display ashes and brings up the function concerned.
For programmable functions, when the selection is used, the function is deactivated and the
programming is erased.
To better understand the watch functionalities (see the examples described on pages 28 and 30).28 and 30). and 30).30).).
To Next Page
Loading...
