Omega Speedmaster Skywalker X-33 - Timer

22
TIMER diSplay
The TIMER function allows you to count down a pre-dened time period, and then count the elapsed
time after passing zero.
(1)
AT the end of the countdown, the " " sign appears in place of the " " sign, and the time is counted
from the TIMER zero point.
The TIMER can be programmed up to a countdown of 99 days, 99 hours, 59 minutes,
59 seconds and 99 hundredths. Afterwards the time can be counted up to the same values.
For information about the chimes see page 25.25..
Before the end of the
countdown
(1)
After the end of the
countdown
(1)
Number of days elapsed
or ,
(see opposite)
Selected function
Programmed time
Time countdown:
- time remaining before deadline " " or
- time passed after countdown " "
Before or during the countdown After the countdown
Number of days
programmed