Start the countdown
Synchronize with the
ofcial time to the nearest
minute
(1)
Reset the countdown to zero
if it is stopped
Stop the countdown
(1)
If more than 30 seconds have elapsed, the
time is synchronized to the next minute;
otherwise it is kept to the current minute.
In either case, the seconds are reset to zero.
A single press on the same button enables
you to continue the countdown from the
stopped value.
If the countdown is activated during the
reset, it will be reset to zero and restart
instantly.
Exit the function
and
access the log book
(
) once the countdown
has been launched.
2 buttons to press so
that the user cannot
exit the function by
mistake.
ME_X33_Regatta_V1.0.book.indb 20 27.02.2017 16:08:36
To Next Page
Loading...
