"Race"
This function is displayed automatically at the end of the countdown (
). It enables you to save
the race time and the split times at the buoys.
Upon switching to race mode
( ), the log book ( ) is
automatically erased.
Save the time under T1
and the buoy race time
(1)
Reset the Race timer to
zero when it is stopped
and go back to the
function
(2)
Stop the Race timer
(1)
The buoy time is still saved in log book A (
A01 to A10). If the log is full, the buoy time is
placed in A10, and all the other previous values
have their number decreased. Hence value A01
is lost.
A single press on the same button enables
you to continue the race timing from the
stopped value.
(2)
If the Race function is active, you are taken back
to the function, and the countdown starts
instantly according to the last programmed
value.
ME_X33_Regatta_V1.0.book.indb 21 27.02.2017 16:08:36
To Next Page
Loading...
