Omega Speedmaster X-33 REGATTA - Special Functions

30
P1
P3
P4
P2
SPECIAL FUNCTIONS
enerGy SavinG mode
The energy saving mode is activated by pulling the crown out.
• the display disappears;
• the hands move to 12 o'clock;
• all the measurements in progress continue, but the chimes are deactivated.
Push the crown back in to exit energy saving mode. (This mode does not work
in CTd or RAC mode).
Synchronization
If the watch is in energy saving mode, it is possible to synchronize the hands. If the hands do not display
exactly 12:00:00, follow the procedure below:
• press P4 to move the hour and minute hands forward in half-minute intervals;
• press P3 to move the hour and minute hands forward in one-hour intervals;
• press P1 to move the seconds hand forward in one-second intervals.
diSplay liGhtinG
This function facilitates reading the display information.
Activate digital display
backlighting
After approximately 5 seconds, the
display returns to normal
Clear the hands to optimal
reading position of the digital
display
After approximately 5 seconds, the hands
return to their normal position
ME_X33_Regatta_V1.0.book.indb 30 27.02.2017 16:08:40