19
SPINNING BRUSH ASSEMBLY
Brush
groove
Outer wing
Down
UP
Inner
wing
brush and the direction of silicone
brush.
There are grooves to insert silicone brush in
Silicone brush has inner wing
and outer wing.
As shown to the left, let ‘inner wing’ face
Insert the silicone brush into
According to the No.1 above, let the longer
Hold the outer wing of silicone brush
insert the inner wing into the groove
Pull the inner wing tight enough.
Push silicone brush from the outer side
with the other hand as shown to the left.
Hold the outer wing of silicone brush
assembled, there is a risk of breakage.
it tight enough.
SPINNING BRUSH SILICONE BRUSH
To Next Page
Loading...
