5
WARNINGS AND CAUTIONS
WARNING
DO NOT PLUG IN OR UNPLUG WITH WET HANDS.
It may cause an electric shock or an injury.
DO NOT USE WITH OTHER THAN RATED VOLTAGE.
It the voltage is different, it may shorten the life of the motor or cause a failure.
PLUG THE POWER CORD CORRECTLY AND PUSH IT TIGHT IN A WALL SOCKET.
IF THE SUPPLY CORD IS DAMAGED, IT MUST BE REPLACED BY THE
MANUFACTURER, AN AUTHORIZED SERVICE AGENTOR SIMILARLY QUALIFIED
PERSONS IN ORDER TO AVOID A HAZARD.
NEVER ALTER THE APPLIANCE. ALSO, DO NOT DISASSEMBLE OR REPAIR BY
YOURSELF. DO NOT INSERT FINGERS, FOREIGN SUBSTANCES OR OBJECTS
SUCH AS PINS INTO GAPS OR HOLES IN THE BASE.
DO NOT MOISTEN THE BASE OR SPLASH WATER ON THE BASE.
Be careful not to let any liquids or other substances get into the switch.
DO NOT OPERATE THE SWITCH WITH WET HANDS.
WHEN THE POWER CORD WIRE IS BROKEN OR DAMAGED OR THE PLUG-IN
PART BECOMES LOOSE, DO NOT OPERATE IT.
FOR SAFETY, A GROUND CONNECTION MUST BE USED.
Be sure to use the socket with ground connection.
To Next Page
Loading...
Need help?
General
