OMEGA-VSHP.F-PGD-1904 | OMEGA
www.omega-heatpump.com 9
Compressor Mounts
All compressors are mounted
to the chassis using vibration
dampening inserts.
Vibrational Rail
The refrigeration chassis is mounted on
a double isolated base with rubberized
dampeners to isolate the chassis from
the cabinet to minimize noise vibrations.
Motor Mount Isolators
Motors are attached to the blower
housings with rubber isolation fasten-
ers which reduces the vibration pro-
duced by the rotating fan assembly.
Flex Duct Isolator
Units with the optional Gold
Series option feature a flexi-
ble canvas duct connection
for added noise and vibra-
Unit Foot Insulation
Neoprene pads, factory provided as
standard, are field installed under the
cabinet base to isolate the unit from the
floor surface.
Figure 6 Vibration and Noise Dampening Features
2.5 Noise Attenuation Features
Omega Heat Pump units offer up to 5 separate methods of vibrational isolation (Shown below).
To Next Page
Loading...
