OMEGA-VSHP.F-PGD-1904 | OMEGA
www.omega-heatpump.com 25
Figure 24 Perimeter Panel Vertical Furring Drawing
B = Base Height (Min 5", increases in 1" increments)
C = Base Height - 0.875"
D = Base Height + 0.375"
Notes:
• "B" is specified by customer based on base board height + total flooring thickness
• Base board must be at least 0.5" smaller than "C"
• Calculate finished floor thickness as part of baseboard height requirement
58 - 1/2”
Table 9 Perimeter Panel Rough-In Dimensions
5.6 Perimeter Front Return Air Panel & Furring Details (Cont’d)
-
X 16 18 1/2 19 3/8
Y 18 21 1/2 21 3/8
Z 22 25 1/2 25 3/8
To Next Page
Loading...
