The Bead Ruptor 24 Elite consists of the following:
Description Quantity
Bead Ruptor 24 Elite Assembly 1
Power Cord 1
Spare Fuse 1
User Manual 1
Overview
Voltage
1. Lid
2. Drive Hub
3. Tube Carriage
4. Lid Latch
1.
2.
3.
4.
5.
6.
7.
8.
5. Touch Screen
6. 120V/220V Switch & Fuse
7. ON/O Switch
8. Power Cord Port
220 volts
- Remove Warning stickers from the back of the unit and check that the voltage matches the
voltage delivered by your electric power supply.
CAUTION: DO NOT connect the unit to the main power supply until correct voltage is selected.
- Plug the unit into power supply using the supplied power cord.
CAUTION: If the voltage supplied to the unit is higher than what is indicated on the voltage
switch, the electronics can be irreversibly damaged, voiding the warranty.
220 volts
To Next Page
Loading...
