How to reduce excessive noise during normal operation of Omni Laboratory Equipment?
To address excessive noise during normal operation of your Omni GLH, check the condition of the PTFE bearing and replace it if needed.
What to do if the motor won’t start or shuts off while processing with Omni Laboratory Equipment?
If the motor won’t start or shuts off while processing, press down on the breaker (115v only).
How to troubleshoot an Omni Laboratory Equipment that is plugged in but not functioning?
If the Omni GLH is plugged in and turned on but is not functioning, check the power cord connectors and the wall socket for power to the outlet.
What to do if Omni Laboratory Equipment motor speed declines or stops?
If the motor unit operating speed declines, stalls intermittently, or stops completely, check that the brushes are not worn and are correctly installed. Replace if necessary.
General| Brand | Omni |
|---|---|
| Model | GLH |
| Category | Laboratory Equipment |
| Language | English |
Critical safety warnings for immediate harm.
Precautions to prevent injury, burns, or fire.
Information on brush wear, life expectancy, and replacement indicators.
Instructions for attaching and securing generator probes to the motor.
Guidance on proper immersion depth and sample circulation for effective processing.
Procedures for safely decontaminating units used with hazardous materials.
To Next Page
