9
SECTION 2 — MOTOR MAINTENANCE
2.5 PLUG REQUIREMENTS
This instrument is equipped with an electric cord and housing which is
double insulated. The unit must be plugged into a polarized outlet that
is properly installed and grounded in accordance with all local codes
and ordinances.
WARNING: DO NOT modify the plug or cord that is provided. If the plug will
not t the outlet, have the proper outlet installed by a qualied electrician.
WARNING: Reduce the risk of unintentional starting; make sure the
speed switch is in the OFF position before plugging in the motor.
WARNING: Improper connection of the equipment can result in a risk
of electric shock.
WARNING: Damaged or worn power cords should be repaired or
replaced immediately by a qualied electrician.
2.6 WIRING DIAGRAMS
To Next Page
Loading...
