EasyManua.ls Logo

Omnitronic AS-900 - Safety Labels; Operating Determinations

Omnitronic AS-900
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11038810_V_1_1.DOC
28/47
HEALTH HAZARD!
By operating amplifying systems, you can produce excessive sound pressure levels that may
lead to permanent hearing loss.
There are no serviceable parts inside the speaker-system. Maintenance and service operations are only to
be carried out by authorized dealers.
Safety labels
Please respect the following safety labels used for this speaker-system:
WARNING
High voltage.High voltage.
No serviceable parts inside.
Disconnect from mains
before replacing the fuse.
Maintenance and service
operations only by authori-
zed dealers.
No serviceable parts inside.
Disconnect
from mains
before
replacing the fuse.
Maintenance
and service
operations
only by authori-
zed
dealers.
OPERATING DETERMINATIONS
This speaker-system is an active system which can be used for permanent installations or for mobile use.
This product is allowed to be operated with an alternating current of 220-250 V AC, 50 Hz or 110-120 V AC,
60 Hz and was designed for indoor use only.
The given maximum power of the speaker-system describes short-term peaks the system can handle as a
maximum. The correspondent RMS power is - as of all comparable systems (also from other manufacturers)
- significantly lower. The maximum power of the speaker-system must never be exceeded. When operating
the speaker-system, please make sure that the loudspeakers always sound well. When distorsions can be
heard, either the amplifier or the loudspeaker is overloaded. Overloads can quickly lead to amplifier or

Related product manuals