11038810_V_1_1.DOC
47/47
TECHNICAL SPECIFICATIONS
Top:
Rated power: 150 W RMS
Program power: 200 W
Components: 8" woofer, 1" horn
Connections: 1 Speaker-socket
Sensitivity (1 W/m): 99 dB
Max. SPL (1 m): 121 dB
Impedance: 4 Ohms
Frequency range: 120 Hz - 18 kHz
Crossover frequency: 2.5 kHz
Dispersion angle (1 kHz): 90° x 40°
Dimensions (H x W x D): 420 x 275 x 250 mm
Weight: 11 kg
Subwoofer:
Rated power: 2 x 300 W RMS
Program power: 450 W
Components: 15" woofer
Inputs: 2 x XLR, 2 x 1/4" jack
Through: 2 x XLR
Outputs: 2 Speaker-sockets
Sensitivity (1 W/m): 101 dB
Max. SPL (1 m): 127 dB
Impedance: 8 Ohms
Frequency range: 45 - 250 Hz
Dimensions (H x W x D): 545 x 455 x 640 mm
Weight: 50 kg
Amplifier:
Power supply: 220-250 V AC, 50 Hz ~
or 110-120 V AC, 60 Hz ~
Power consumption (max.): 1300 W
Nominal power output satellite: 2 x 150 W RMS / 4 Ohms
Nominal power output subwoofer: 300 + 300 W RMS
Min. input sensitivity: 0.775 V
Control elements: Power switch, Gain-control (one per channel), Low/Mid/High-equalizer,
Master-control, Ground Lift, limiter
LED indicators (per channel): Power, Signal/Limit
Protection circuits: Short-circuit, DC-protection-circuit, Thermal protection-circuit, Softstart,
opto-limiter and subsonic filter
Equalizer:
Tone control/channel:
Treble: ±10 dB at 10 kHz
Middle: ±10 dB at 1.3 kHz
Bass: ±10 dB at 75 Hz
Active crossover:
Crossover frequency: 50 - 500 Hz, -3 dB
Please note: Every information is subject to change without prior notice. 19.09.2005 ©
To Previous Page
Loading...
