EasyManua.ls Logo

Omnitronic AZ-212A - Stacking

Omnitronic AZ-212A
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
00038393.DOC, Version 1.0
29/36
The manufacturer cannot be made liable for damages caused by incorrect installations or insufficient safety
precautions!
Please note: Before installing the eye-bolts, make sure that the the thread is always in perfect condition and
free from dirt etc.
Install the eye-bolts in the threaded holes of the speaker-system. The eye-bolts must be tightened until stop
position, hand-tight and without any tools.
Insert the quick links of the safety bonds in the eye-bolts of the speaker-system. Pull the safety bonds over a
safe fixation spot. Insert the end in the quick link and tighten the safety screw.
The maximum drop distance must never exceed 20 cm.
A safety rope which already hold the strain of a crash or which is defective must not be used again.
DANGER TO LIFE!
Before taking into operation for the first time, the installation has to be approved by an expert!
Stacking
This speaker-system may only be installed on top of another speaker-system if both systems are lashed up
with each other via appropriate clamping belts and protected against flipping over.

Related product manuals