Omnitronic DD-4220 - English; Introduction; Features; Operating Instructions

13
OPERATING INSTRUCTIONS
''
'LUHFWGULYH7XUQWDEOH
For your own safety, please read this user manual carefully
before you initial start-up.
All persons involved in the installation, operation and maintenance of this device have to:
- be qualified
- follow the instructions of this manual
1. INTRODUCTION
Thank you for having chosen an OMNITRONIC DD-4220/4250 turntable. If you follow the instructions given in
this manual, we can assure you that you will enjoy this device for many years.
Unpack your DD-4220/4250.
Please make sure that there are no obvious transport damages. Should you notice any damages on the A/C
connection cable or on the casing, do not take the device into operation and immediately consult your local
dealer.
1.1 Features
High Torque-turntable
Direct drive with an extremely high torque • For professional use • High-quality tonearm bearing • Tonearm
height adjustable • With Reverse-function for adjusting the rotation-direction • Quartz-controlled for highest
precision • Quartz Lock-button for adjusting the preset standard speed • Three preset speeds (33 1/3, 45 and
78 RPM) • Speed-control switchable from +/- 10 % to +/- 20 % • Power-switch protected against accidentally
switching off (rotary switch) • Delivery without pick-up system • Large Start/Stop-button • Remote start
possible via ¼”-connection on the rear panel • Strobe lamp for exact speed adjustment • Target lamp •
Delivery includes removable dustcover • Adjustable anti-skating • Shock-absorbing feet
2. SAFETY INSTRUCTIONS
31ED9?>
Be careful with your operations. With a voltage of 230 V you can suffer a dangerous
electric shock when touchin
g
the wires!